Short answer: Toilet installation involves setting a new wax ring seal, securing the fixture to the floor flange, and connecting the water supply line before testing for leaks.
A proper toilet installation depends on getting the wax ring seal right — it's the single most common source of leaks when a toilet isn't installed correctly. Beyond that, the process is fairly straightforward: secure the fixture, connect the supply line, and test.
This is a common project during a bathroom remodel or when adding a bathroom that wasn't there before.
Signs You May Need This Service
- A toilet that runs continuously after flushing
- Weak or incomplete flushes
- Water rocking or wobbling at the base
- Water on the floor around the base after flushing
- Frequent clogs in one toilet specifically
What the Service Typically Involves
- Checking the flapper, fill valve, and flush mechanism inside the tank
- Inspecting the wax ring and base seal for leaks
- Testing the shutoff valve and supply line
- Replacing internal components or the fixture itself depending on age and wear